[FR] - High / Low LED intensity control

commandcom · Junior Member Joined: 18 Feb 2007 Posts: 83

Hello!

Just saw this option in the Kore2 controller and thought it would be great: To be able to set a maximum value and a minimum value for the LEDs in the cc121. So, if you want to actually be able to SEE them dark enviroments, just set the LOW level to 10% instead of the 'default' 0%. Or if you think the HIGH level is just too high for you, just set it to 80% instead of the 'default' 100%.

This is mainli due to the fact that (maybe I'm the only one) I work in a Low-light enviroment and, sometimes, the Trasnport buttons, for example, are difficult to distinguish. If I was able to set a LOW level major then 0, (just a little bit, as it happens on the 'start up sequence', in wich all leds dime in different intensities) that would solve the issue.

Hope this one makes it,

Jorge
_________________
C5 / Reason4 / Mac OS (Latest) / MacPro Single Quad 2.6Ghz / 8GB / ATI / IntensityPro / MR16CSX / CC121 / Axiom61 / Kore 2 / Maschine / Komplete 5 / EW Play

zoot · Junior Member Joined: 27 May 2006 Posts: 73

RokGeetar · Posted: Wed Nov 04, 2009 4:23 pm Post subject:

MusicJohn · Posted: Fri Nov 06, 2009 4:10 pm Post subject:

+1

I'm sure this would be possible as when you first switch the unit on the LEDs cycle through their brightness ranges. Would be great to somehow have a way of setting them to their brightest setting as I too have ambient lighting and difficult to distinguish the transport buttons.
_________________
PC i7-930, GByte X58-UD5 rev1, 6Gb ram 1600mhz, Win7(x64) OS, Cubase 5.5(x86), N12 mixer, MR816x, CC121, HS80M monitors,KX-61,01X, AW2400+mLAN, Sequel2, Wavelab Studio 6

commandcom · Junior Member Joined: 18 Feb 2007 Posts: 83

Any feedback on this?
_________________
C5 / Reason4 / Mac OS (Latest) / MacPro Single Quad 2.6Ghz / 8GB / ATI / IntensityPro / MR16CSX / CC121 / Axiom61 / Kore 2 / Maschine / Komplete 5 / EW Play

SluckP · New Member Joined: 30 Jan 2006 Posts: 9

+1

This would be great!!

walterh · Junior Member Joined: 08 Jun 2008 Posts: 25

+1
_________________
Cubase 5.1.0 / Reason 4.0
MR-816X / CC121
Roland VS1880, Roland HP 1700, Korg T3, Ensoniq ESQ M, Kawi 6' Grand
i-mac, OS 10.5.8 2Ghz Intel Core Duo
www.musiclibrarystudios.com

ALSTUDIOS · Posted: Wed Jan 06, 2010 1:20 pm Post subject:

Hi

I just stated some months ago, that I think, not even all possible LED's are switched on during operation Exclamation

(Just compare the start-up behavour and during operation.....)

But according to Steinbergs philosophy, you will have to buy the next, regular version (Cubase 6 Question

) to use this function.
(or you buy a new CC121 each 6 months Razz

)

Cheers
_________________
HP Pavillon 6220CH, 2x1.6GHz, 2GB RAM, 320GB HD, Vista 32, Cubase AI4.5.2, Tascam US-1641 V2.00, CC121 V1.5.1, Tannoy Reveal 6

leggy · Junior Member Joined: 30 May 2007 Posts: 37

I love my CC121 but yes it would be great to be able to set the level of illumination of those transport controls. I'd even settle for just having the lights on all the time at full power so that I can see them in a darkened studio. Hopefully this isn't too difficult to do and we might see it soon.

Rob
_________________
Rob Lord
Stylophonic Music Productions
www.stylophonic.tv
Mac Pro 8 Core 3 Ghz, OS X 10.6.3, 32GB Ram, Sonnet Allegro FireWire 400 PCIe, MR816 X, CC121, Midi Express 128, Decklink SP. Powercore FW, UAD-2 Quad, Cubase 5 latest version.

walterh · Junior Member Joined: 08 Jun 2008 Posts: 25

+!
_________________
Cubase 5.1.0 / Reason 4.0
MR-816X / CC121
Roland VS1880, Roland HP 1700, Korg T3, Ensoniq ESQ M, Kawi 6' Grand
i-mac, OS 10.5.8 2Ghz Intel Core Duo
www.musiclibrarystudios.com

Lenners · Posted: Wed Mar 17, 2010 10:57 am Post subject:

+1

would be great

Leners
_________________
MacBookPro2.4 _4GB- OS X 10.5.8 Cubase5.1.1_CC121_

Viva Las Vegas · Posted: Mon May 03, 2010 12:53 am Post subject:

+1
_________________
Sean Dockery
www.SeanDockery.com

Cubase 5 and every vst plug-in that my wife allowed me to buy.

Two 2.66GHz Quad-Core Intel Xeon E5430 (8 cores), Tyan Dual Xeon Motherboard, 8GB DDR2-667 FBDIMM -OS Drive: 300GB SATA2 (10k RPM : 16MB cache) 3TB storage (including 2 Raptor drives with RAID) Windows 7 64-bit

RichardKC6 · Posted: Wed Jun 02, 2010 10:46 am Post subject:

Npt only +1, I asked for this when the device was launched. Even the brochure images show the LEDs illuminated, implying that they are lit when in use.
_________________
Cubase 5, GA,HALion, MBP 2.2GHz, Onyx Satellite, Waldorf Edition, CC121.
Writer, photographer, musician, car nut.

Currently using Trinity Pro X, Virus Indigo 2, Moog Voyager, XV3080, V-Synth XT, X-Station 49 + Godin/Kramer guitars + electric violin.

karltl · Posted: Fri Jul 02, 2010 6:37 am Post subject: Strange that you cant do this????

I agree...looking at the pictures of the unit it looks like the lights are on. I just received mine and none of the transport lights are on at all (or they're so dim as to be effectively invisible). Sounds like some folks can actually see them a little??? The various selector buttone on mine will light when i press them (eq on/off, various track buttons mute etc... but nothing on the transport section. Is this normal???
_________________
Intel i5 quad core CPU, Win7 64 bit, 8 gig ram, 7 hard drives, 2 Gforce 8400 fanless video cards, quad displays. RME HDSPe & RME Multiface, RME Fireface 800, Steinberg MR816X. Cubase 4.5.2, Kontakt3, Halion Player, EWQL Symphonic Orchestra Gold, EWQL Collosus, BFD2, Korg Pad Control, Steinberg CC121 controller, ART MPA Gold 2 chan mic preamp.

Remote rig- ADK model 7600 laptop (i7, 17" mon). Mobile rack for the Fireface 800, MR816x , ART S8 mic splitter, Furman PL-8C power conditioner.

Mic's:AKG C414's (stereo pair), Rode NT5's (Stereo pair), Fathead Ribbon mic's (stereo pair), SM57's (3), SM58 (1), AKG Perception 200 condensor, AKG D112, Sennheiser e914 condensor, EEV ND457 dynamic.